Thermal Insulation Materials - Tubes - ASEC Kunststoffen B.V.

[insert_php]if ( function_exists(‘yoast_breadcrumb’) )
{yoast_breadcrumb(‘

‘,’

‘);}[/insert_php]

Thermal Insulation Materials – Tubes

» Go to Thermal Insulation Materials – Sheets

Filter:

Material

Download (datasheet insulation materials – tubes.pdf)

Datasheet pdf available.
Datasheet pdf not available.

Standard types according to DIN EN 61212.

Tubes made from industrial laminated materials.

Value: Minimum requirements of DIN EN 61212.
Value: Typical values, general recommended values, which must not be used as standard values.

(1): The flexural strength measured at 150 °C ± 3K must not be less than 50% of the defined value.
(2): After 96 h pretreatment in air at 105 °C ± 5K directly prior to testing and immediate immersion in the hot oil.

Material	Characteristic property applications	Resin	Substrate
AS EP GC 21	Electrical and mechanical applications, TC 130	Epoxy	Woven glass cloth
AS EP GC 22	As type 21 but with TC 155	Epoxy	Woven glass cloth
AS EP GC 23	As type 21 but with combustibility according to UL 94 V-0	Epoxy	Woven glass cloth
AS EP MP 21	Epoxy mica paper, electrical applications at high temperatures	Epoxy	Mica paper
AS MF GC 21	Resistant to arcs and tracking	Melamine	Woven glass cloth
AS PF CC 21	Mechanical and electrical applications, fine weave	Phenolic	Woven cotton cloth
AS PF CC 22	Mechanical and electrical applications, coarse weave	Phenolic	Woven cotton cloth
AS PF CC 23	Mechanical applications, very coarse weave	Phenolic	Woven cotton cloth
AS PF CC 24	Mechanical and electrical applications, very fine weave	Phenolic	Woven cotton cloth
AS PF CP 21	Electrical and mechanical applications at low voltages	Phenolic	Cellulose paper
AS PF CP 22	Electrical applications at high-voltage mains frequency	Phenolic	Cellulose paper
AS PF CP 23	As type 21 but with better electrical properties	Phenolic	Cellulose paper
AS PF GC 21	Very high mechanical strength at moderate temperatures	Phenolic	Woven glass cloth

Availability

Download (datasheet insulation materials – tubes.pdf)

Datasheet pdf available.
Datasheet pdf not available.

Standard types according to DIN EN 61212.

Tubes made from industrial laminated materials.

Value: Minimum requirements of DIN EN 61212.
Value: Typical values, general recommended values, which must not be used as standard values.

(1): The flexural strength measured at 150 °C ± 3K must not be less than 50% of the defined value.
(2): After 96 h pretreatment in air at 105 °C ± 5K directly prior to testing and immediate immersion in the hot oil.

Availability	Diameter
Unit	mm
AS EP GC 21	2-250
AS EP GC 22	2-250
AS EP GC 23	2-250
AS EP MP 21	2-250
AS MF GC 21	2-250
AS PF CC 21	2-250
AS PF CC 22	2-250
AS PF CC 23	2-250
AS PF CC 24	2-250
AS PF CP 21	2-250
AS PF CP 22	2-250
AS PF CP 23	2-250
AS PF GC 21	2-250

Physical Properties

Download (datasheet insulation materials – tubes.pdf)

Datasheet pdf available.
Datasheet pdf not available.

Standard types according to DIN EN 61212.

Tubes made from industrial laminated materials.

Value: Minimum requirements of DIN EN 61212.
Value: Typical values, general recommended values, which must not be used as standard values.

(1): The flexural strength measured at 150 °C ± 3K must not be less than 50% of the defined value.
(2): After 96 h pretreatment in air at 105 °C ± 5K directly prior to testing and immediate immersion in the hot oil.

Physical Properties	Water absorption	Density	Combustibility
DIN EN 61212-2	7.2	7.3	UL 94
Test Standard	ISO 62	ISO 1183
Unit	mg/cm²	g/cm³	Category
Min/Max	Max
AS EP GC 21	1.5	1.7-1.9	-
AS EP GC 22	1.5	1.7-1.9	-
AS EP GC 23	1.5	1.7-1.9	V-0
AS EP MP 21	2	1.5-1.8	-
AS MF GC 21	5	1.7-1.9	V-0
AS PF CC 21	5	1.15-1.35	-
AS PF CC 22	10	1.15-1.35	-
AS PF CC 23	13	1.15-1.35	-
AS PF CC 24	5	1.15-1.35	-
AS PF CP 21	-	1.1-1.2	-
AS PF CP 22	-	1.05-1.15	-
AS PF CP 23	-	1.1-1.2	-
AS PF GC 21	-	1.7-1.9	-

Mechanical Properties

Download (datasheet insulation materials – tubes.pdf)

Datasheet pdf available.
Datasheet pdf not available.

Standard types according to DIN EN 61212.

Tubes made from industrial laminated materials.

Value: Minimum requirements of DIN EN 61212.
Value: Typical values, general recommended values, which must not be used as standard values.

(1): The flexural strength measured at 150 °C ± 3K must not be less than 50% of the defined value.
(2): After 96 h pretreatment in air at 105 °C ± 5K directly prior to testing and immediate immersion in the hot oil.

Mechanical Properties	Flexural strength perpendicular to laminations	Compressive strength axial	Cohesion between layers
DIN EN 61212-2	5.1	5.2	5.3
Test Standard	ISO 178	ISO 604	IEC 61212-2
Unit	MPa	MPa	MPa
Min/Max	Min	Min	Min
AS EP GC 21	300	175	200
AS EP GC 22	300 ⁽¹⁾	175	200
AS EP GC 23	300	175	200
AS EP MP 21	100	60	30
AS MF GC 21	120	80	150
AS PF CC 21	90	110	90
AS PF CC 22	80	100	90
AS PF CC 23	80	100	90
AS PF CC 24	100	120	100
AS PF CP 21	100	100	70
AS PF CP 22	100	80	70
AS PF CP 23	100	100	70
AS PF GC 21	140	120	200

Electrical Properties

Download (datasheet insulation materials – tubes.pdf)

Datasheet pdf available.
Datasheet pdf not available.

Standard types according to DIN EN 61212.

Tubes made from industrial laminated materials.

Value: Minimum requirements of DIN EN 61212.
Value: Typical values, general recommended values, which must not be used as standard values.

(1): The flexural strength measured at 150 °C ± 3K must not be less than 50% of the defined value.
(2): After 96 h pretreatment in air at 105 °C ± 5K directly prior to testing and immediate immersion in the hot oil.

Electrical Properties	Dielectric strength perpendic at 90 ºC in oil (thickness 3 mm)	Dielectric strength parallel at 90 ºC in oil	Insulation resistance	Permittivity 50 Hz	Permittivity 1 MHz	Dissipation factor 50 Hz	Dissipation factor 1 MHz
DIN EN 61212-2	6.1	6.1	6.2	6.3	6.3	6.3	6.3
Test Standard	IEC 60243-1	IEC 60243-1	IEC 60167	IEC 60250	IEC 60250	IEC 60250	IEC 60250
Unit	kV/mm	kV	MΩ
Min/Max	Min	Min	Min	Max	Max	Max	Max
AS EP GC 21	7.7	40	1.000	-	5.2	0.5	0.4
AS EP GC 22	7.7	40	1.000	-	5.2	0.5	0.4
AS EP GC 23	7.7	40	1.000	-	5.2	0.5	0.4
AS EP MP 21	11	30	100	-	5.2	-	0.4
AS MF GC 21	3.3	10	0.1	-	8	-	0.2
AS PF CC 21	1.6	10	10	-	-	-	-
AS PF CC 22	1.6	10	2	-	-	-	-
AS PF CC 23	1.6	8	0.5	-	-	-	-
AS PF CC 24	1.6	10	2	-	-	-	-
AS PF CP 21	-	15	1	-	-	-	-
AS PF CP 22	9.9	50 ⁽²⁾	1	-	-	-	-
AS PF CP 23	6.1	25	5	-	-	-	-
AS PF GC 21	4.8	15	20	-	-	-	0.4

Thermal Properties

Download (datasheet insulation materials – tubes.pdf)

Datasheet pdf available.
Datasheet pdf not available.

Standard types according to DIN EN 61212.

Tubes made from industrial laminated materials.

Value: Minimum requirements of DIN EN 61212.
Value: Typical values, general recommended values, which must not be used as standard values.

(1): The flexural strength measured at 150 °C ± 3K must not be less than 50% of the defined value.
(2): After 96 h pretreatment in air at 105 °C ± 5K directly prior to testing and immediate immersion in the hot oil.

Thermal Properties	Thermal endurance
DIN EN 61212-2	7.1
Test Standard	IEC 60216
Unit	T.I.
Min/Max	Min
AS EP GC 21	130
AS EP GC 22	155
AS EP GC 23	130
AS EP MP 21	155
AS MF GC 21	130
AS PF CC 21	120
AS PF CC 22	120
AS PF CC 23	120
AS PF CC 24	120
AS PF CP 21	120
AS PF CP 22	120
AS PF CP 23	120
AS PF GC 21	130

The above values are provided for general purposes only and not meant to be a specific recommendation for any individual application. All values were determined under laboratory conditions. ASEC Kunststoffen B.V. is not directly neither indirectly responsible for any claim resulting from the use of any information provided in above values. ASEC Kunststoffen B.V. 2016 ©.